Category: Accessories

with Bill Johnston It only takes a first glance at one of Tom Wood’s drive shafts to realize the quality, workmanship and attention to detail that is put into each and every unit that Tom ships. The photo on the right shows the new CV drive shaft and the stock Samurai unit side by side. […]

with Larry Harris   Needed a new bumper, need a place to mount a full size spare and gas can. Know I do not want to reinvent the wheel so to speak. I will let someone else to all the engineering and the construction. It has to be bolt on. I gave Calmini a call, […]

  Clicky Starter Quick Fix Kit with Bill Johnston When I picked up an 88.5 Sami last year, it would start anytime, all the time, without fail. I was lucky to get such a solid vehicle. But after I started on the trip to the 2003 ZookiMelt there was a problem at the first fuel […]

with Ron Sutcliffe Calmini Winch Bumper Installation The Calmini instructions were generic, they seemed to be written to fit other bumpers as well. The instructions for the winch bumper appear to be the same as the tube bumper. The ARB style winch bumper looks far cooler than the tube bumper.  Here are the tools you […]

    Page 3   Now you’ve got all that back together it’s time to put the caliper guide pins and their rubbers back in.  I filled one rubber with grease and put it in place, then I put some grease on the caliper guide pins and pushed that all the way through from the […]

      Page 2   Yep, not good at all. At first you’d say this piston is beyond repair, but it appeared that a “quick” scrub with a clean Brillo pad was enough to save me a trip to the store.         See? Yes it’s the same one !! Check it […]

    with “NitroMax” Brake Caliper OverhaulPage 1 If – like me – you do a lot of Offroading you know how important it is to maintain your vehicle every time you’ve been in the mud. You also know how hard it sometimes is to find the time or – after a long day of […]

    You got Crabs? When Myron Thorson first told me he had Crabs, I had to wonder why he would be bragging… and then I saw the new Zuks Off Road differential protection he had just finished producing and it all fell into place. The quarter inch steel bash plate he designed looked like […]

    with Tim Tackett North Coast Off Road Calmini Rocker Skids with North Coast Offroad  The Calmini Rocker Skids offer a simple inexpensive solution for protection of the vulnerable rocker panels on the Samurai. The kit is very basic, consisting of two prefabricated pieces, one for the left, and one for the right side […]

    with Bill Johnston Add a New Tail Gate Logo Have you ever had the urge to look just a little bit different from the rest? Sometimes doing something unique can cause a head or two to turn. That may be why some of us stick with Zooks instead of going with the rest […]