0 0
Read Time:2 Minute, 17 Second

Wrenchin' with IZook with Wiley Johson

Suzuki Mirror Modification

My Sammy came with the doors already modified so that they could be removed.  Occasionally, I take them off mostly to make working on the interior easier.  But to take them off to enjoy the openness during a run, I had not done; mostly because I would not have any mirrors to see what was behind me.  Now when you rockcrawl, you might not really need to see what is behind but in Texas, if you drive on the street, you need 2 mirrors to be legal.  Recently, my wife asked if we could drive around without doors so I was prompted to do something about getting mirrors that did not depend on having the doors mounted.  I looked around to find a mirror set that did not cost an arm and leg.  There were several for Jeeps that had nice stainless steel mounts and featured removable mirrors but cost almost $60 per side.   Visiting a friend’s office, I looked at a Quadratec catalog and found a set of YJ mirrors made by Steel Horse for $40 for the set; in black like my Sammy!!.  I ordered them along with a new spare tire cover.   This article covers the installation on ‘Lil Pup.

Select for larger image

I found that the mirrors could be mounted to the bolts holding the windshield on.

Select for larger image

The two arms that the mirrors mount to are different and the longer one goes on the left side

Select for larger image

Here is a close-up of how the bracket attaches to the bolts on the windshield mount.

     

Select for larger image

The shorter and straighter arm is for the mirror in the right side.

Select for larger image

Here is another close-up of how the bracket attaches to the bolts on the right side.

Select for larger image

And here is how the Sammy looks with the doors off and how the mirrors look mounted.

     

 

I went to the auto parts store and bought a couple of parabolic stick-on mirrors to help see more to the side.

Select for larger image

Here is a small one that I have on the left (drivers) side.

Select for larger image

Here is the large one on the right side so I don’t have a blind spot.

      Here is how ‘lil pup looks with both mirrors on.

Select for larger image

Select for larger image

The Steel Horse model number is #7618 and is designed for a YJ.  The Quadratec part number is 13011.02. I apologize for the graininess of the pictures but the light in my garage was not bright enough for the digital camera to get a really good picture so I had to adjust the picture with the computer.

08/11/10 15:02:50

 

 

Happy
Happy
100 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply