iZook – Suzuki 4×4 Tech Information, Accessories, Travel & Adventure

Low Range Off-Road Samurai Diamond Plate Corner Guards

 

 

An IZook Product ReviewDiamond Plate CornersBy Bill Johnston

Diamond plate is usually something you see on fire engines and show trucks, usually in chrome or polished aluminum. The difference is that one uses it for durable protection in tough environments, and the other... well, it looks good. We are going to use it for both reasons and it will only take about thirty minutes from start to finish.

As you can see, the rear corner of this Samurai has had a couple of dings that could have been prevented with a little armor. In this case we are going to use a set of black powder coated Diamond Plate Rear Corners from Low Range Offroad to not only protect it, but also to cover up those blemishes. One interesting note about these corners... they are delivered bent to fit. You will also not the welded seam. The Samurai body is not flat. Take a look at the photo on the left and you will notice a slight curve that would cause a gap at the top if you were to just wrap a flat piece of material around the corner. So the armor is sliced, sectioned and welded to conform to the stock shape. While it is possible to attach these with sheet metal screws, rivets are included with the kit to ensure a solid, long lasting fit.

The installation was fast and easy. Starting with the two predrilled holes at the back of the armored corner, they were transferred (marked), drilled and riveted.

Once the edge has been established, the panel had to be held in place to drill and rivet the rest. We started at the back and worked towards the front so that there would be no gaps. These are some strong panels, so I wouldn't suggest trying to hold them in place by hand and still hope to keep it tight. We used a tie-down strap and it kept everything tight. The placement of the rest of the rivets is up to you, but you can see were we put them from the yellow dots placed in the photo above.

Not only does it look good, but now it can handle the dings without a problem. If you have an incident where the armor actually gets any damage, you can be sure that the ding in the corner would be the least of your worries.

  Source:

Low Range Off-Road, LC 529 N 2740 W Provo, UT 84601 tel (801) 805-6644 fax (801) 805-8188  

sales@lowrangeoffroad.com tech@lowrangeoffroad.com

Regular Business Hours Monday - Friday, 9:00am - 5:00pm Mountain Time Saturday, 12:30pm - 5:00pm Mountain Time

08/23/10 14:03

 

Share

iZook Connect on Facebook: