1. Detent Spring 2. Detent Ball 3. 2-4 Shift Rail 4. Interlock Ball 5. Hi-Lo Shift Rail 6. Detent Ball 7. Detent Spring 8. Plug 9. Shifter 10. Material to be removed 11. Support Sleeve 12. 4-2 Shift Fork 14. Hi-Lo Shift Fork 16. Snap Ring After disassembly, remove material from 2-4 Shift Rail as shown. Notch in Shift Rail should be .936" long. Press Support Sleeve onto shaft and weld it to fork (we recomend heli-arc). Reassemble transfer case but do not install the Interlock Ball (item 4).

Back to the article

[tech/footer.htm]

iZook Connect on Facebook: